Demodulator Oscilloscpe Probe TX1030
 |
| Model# |
Diode Actuator Voltage |
Bandwidth
(-3dB)
MHz |
Voltage
MAX. |
Cable Length |
| TX1030 |
250mV |
750 |
50VAC/200VDC |
1.2M |
- The TX1030 is a radio frequency demodulator (rectifying) probe designed and calibrated for use on instruments having an input impedance of 10 M¦¸ shunted by 5 pF. This convenient demodulator probe is ideal for viewing modulation of unidirectional radio frequency signals on most general purpose oscilloscopes and digital multimeters using a standard BNC connection.
|
High Frequency Probe For DMM TX-85RF
  |
The TX-85RF High Frequency Probe is designed to convert a DC voltmeter with a input impedance of 10M ohms into a high frequency (100kHz to 500Mhz) RF voltmeter. Conversion from AC to DC is accomplished on a one-to-one basis includes a range of 0.25 to 30V rms. The probe¡¯s DC output is calibrated to be equivalent to the rms value of a sine wave input.
|
- Voltage Range: 0.25 to 30V rms
-
Maximum Input Voltage: 30V rms, 200V dc
- AC to DC Ratio: 1:1
- Ratio Accuracy (At 25 MHz and loaded with 10 M ohm) Above 0.5V: +/- 0.5 dB | Below 0.5V: +/- 1.0 dB | Add +/- 0.2 dB in RF fields of 1 to 3 V/m
- Frequency Response (Relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB | 100 MHz to 200 MHz +/- 2.0 dB | 200 MHz to 500 MHz +/- 3.0 dB
****Specification For Reference ****
|
| [PDF] |
Test-Pen For DMM
TFC-265GP
*Monolithic probes with fixed tips.
*DMM plugs fit most meters fromFluke, Wavetek
(Meterman), HP, Amprobe, Greenlee, and others.
Rating: 1000V per IEC1010-2-031, 10A,.
*Std. Colors: -0 black, -1 red.
*Cable Material:PVC
Mates to any standard 4mm Banana Jack |
 |
TFC-265GPS
*Monolithic probes with fixed tips.
*DMM plugs fit most meters fromFluke, Wavetek
(Meterman), HP, Amprobe, Greenlee, and others.
Rating: 1000V per IEC1010-2-031, 10A,.
*Std. Colors: -0 black, -1 red.
*Cable Material:Silicon
Mates to any standard 4mm Banana Jack
|
|
|
