Attenuator

The attenuator set TX24 is ideal to reduce high signal levels by a fixed attenuation value. The set contains four attenuators with values of 3, 6, 10, 20, 40dB and one feed-through termination TX22.

Attenuator
Frequency Range: DC to 1GHz
Attenuation: 3, 6, 10, 20, 40dB
Impedance: 50Ω
Max. Input Level: 1W(average)
VSWR: 1.5:1 or better

Feed-through terminator TX22 is used to terminate 50Ω sources. Then the signal can be applied to instruments with high impedance inputs.
Technical data
Frequency Range: DC to 1GHz
Impedance: 50Ω
Maximum input power: 2W

20:1 Attenuator

The Attenuator has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscope products.

The Attenuator is a passive 20:1 attenuator. This means that a 20V signal at its input will appear as a 1V signal on the output. As the signal is attenuated, the Attenuator allows voltages of up to 300 V to be measured.

BNC Connector

50 Impedance
Shell: Nickel plated
Center contact: Gold or nickel plated beryllium copper

Contains:

  • BNC "T" Female/Male/Female
  • BNC "T" Female/Female/Female
  • BNC Male to Male
  • BNC Female to Female